Graco 332453C - ExactaBlend AGP Advanced Glazing Proportioner Manual De Usuario

1.

Follow Pressure Relief Procedure in the Exact-
aBlend AGP Advanced Glazing Proportioner, 
Setup-Operation manual before checking or repair-
ing gun.

2.

Check all possible problems and causes before dis-
assembling gun.

Light does not blink green, red, and 
off in sequence when the machine 
is first turned on.

Bad connection or cable

Ensure cable is connected or 
replace the cable.

Bad light stack.

Replace light stack.

The sensor does not activate.

The low level sensor option has not 
been activated on the DM.

Navigate to Screen 1 and activate 
the low level sensor option.

The sensor has not been mounted 
correctly.

Adjust the sensor until it is activated 
by the collar.

The collar has been installed too 
high on the shaft.

Lower the collar until the sensor is 
activated.

Bad connection or cable

Ensure cable is connected or 
replace the cable.

Bad sensor

Replace sensor.

Screen 4 does not show the USB 
option.

Bad connection or cable.

Ensure cable is connected or 
replace the cable.

Bad GCA components.

Replace the GCA components.