Garmin Forerunner 920XT Manual De Propietario

26 

ANT+ Sensors

Your Forerunner is compatible with the 

GSC 10 speed and cadence bike sensor. 

For a list of third-party ANT+ sensors that 

are compatible with the Forerunner, go to 

Before you start training, you must be in 

bike sport mode, and you must pair the 

GSC 10 with your Forerunner. 

Select MODE > Settings > Bike 

Settings > bike name > ANT+Spd/

Cad.

Select Yes in the Bike sensors 

present field.

If necessary, select More to select the 

sensor type.

Cadence data from the GSC 10 is always 

recorded. If there is no GSC 10 paired, 

GPS data is used to calculate the speed 

and distance.
Cadence is your rate of pedaling or 

“spinning” measured by the number of 

revolutions of the crank arm per minute 

(rpm). There are two sensors on the 

GSC 10: one for cadence and one for 

speed. 
For information about cadence alerts, see 

The non-zero data-averaging setting 

is available if you are training with an 

optional cadence sensor. The default 

setting is to include zero values that occur 

when you are not pedaling. 
To turn the non-zero averaging on or off, 

select MODE > Settings > Bike Settings 

> Data Averaging > Cadence.

For a list of third-party ANT+ sensors that 

are compatible with the Forerunner, go to 

Before you can calibrate your power 

meter, it must be properly installed and 

actively recording data. You must be in 

bike sport mode.