Giant Coffeemaker LP122A Manual De Usuario
3
Specifications
Models LP122A/LP122A-4000/LP123
*Pump speeds of 640 RPM and above require a minimum inlet pressure of 12 psig.
**Pump speeds of 805 RPM and above require a minimum inlet pressure of 14 psig.
U.S. ..................................... (Metric)
Volume (Continuous) ........................................... 35.4 GPM ............................ (134 l/m)
Volume (Intermittent) ........................................... 40 GPM ............................... (151.4 l/m)
Discharge Pressure (Continuous) ........................ 1300 PSI .............................. (90 Bar)
Discharge Pressure (Intermittent) ....................... 2000 PSI .............................. (138 Bar)
Inlet Pressure ....................................................... Up to 90 PSI ....................... (Up to 6.2 Bar)
Speed (Continuous) ............................................................................................ Up to 800 RPM*
Speed (Intermittent) ........................................................................................... Up to 885 RPM**
Plunger Diameter ................................................. 1.65” .................................... (42 mm)
Stroke ................................................................... 1.65” .................................... (42 mm)
Crankcase Oil Capacity ....................................... 116 fl.oz. .............................. (3.43 liters)
Temperature of Pumped Fluids ............................ Up to 160
Volume (Intermittent) ........................................... 40 GPM ............................... (151.4 l/m)
Discharge Pressure (Continuous) ........................ 1300 PSI .............................. (90 Bar)
Discharge Pressure (Intermittent) ....................... 2000 PSI .............................. (138 Bar)
Inlet Pressure ....................................................... Up to 90 PSI ....................... (Up to 6.2 Bar)
Speed (Continuous) ............................................................................................ Up to 800 RPM*
Speed (Intermittent) ........................................................................................... Up to 885 RPM**
Plunger Diameter ................................................. 1.65” .................................... (42 mm)
Stroke ................................................................... 1.65” .................................... (42 mm)
Crankcase Oil Capacity ....................................... 116 fl.oz. .............................. (3.43 liters)
Temperature of Pumped Fluids ............................ Up to 160
o
F ......................... (Up to 71
o
C)
Inlet Ports .......................................................................................................... 2 x 1-1/2" NPT
Discharge Ports ................................................................................................. 2 x 1" NPT
Crankshaft Mounting ......................................................................................... Either Side
Shaft Rotation ...................................................... Top of Pulley Towards Fluid End
Weight .................................................................. 116 lbs. ................................ (52.7 Kg)
Crankshaft Diameter ........................................... 1.38” .................................... (35 mm)
Valve Casing - LP122A ..................................................................................... Aluminum Bronze
Valve Casing - LP123 ........................................................................................ Brass
Valve Casing - LP122A-4000 ............................................................................ 303 S.S.
Volumetric Efficiency @ 800 RPM ................................................................... 0.96
Mechanical Efficiency @ 800 RPM ................................................................. 0.85
Discharge Ports ................................................................................................. 2 x 1" NPT
Crankshaft Mounting ......................................................................................... Either Side
Shaft Rotation ...................................................... Top of Pulley Towards Fluid End
Weight .................................................................. 116 lbs. ................................ (52.7 Kg)
Crankshaft Diameter ........................................... 1.38” .................................... (35 mm)
Valve Casing - LP122A ..................................................................................... Aluminum Bronze
Valve Casing - LP123 ........................................................................................ Brass
Valve Casing - LP122A-4000 ............................................................................ 303 S.S.
Volumetric Efficiency @ 800 RPM ................................................................... 0.96
Mechanical Efficiency @ 800 RPM ................................................................. 0.85
PULLEY INFORMATION
Pulley selection and pump speed are based on a
1725 RPM motor and "B" section belts. When
selecting desired GPM, allow for a ±5% toler-
ance on pumps output due to variations in
pulleys, belts and motors among manufactur-
ers.
1.
1725 RPM motor and "B" section belts. When
selecting desired GPM, allow for a ±5% toler-
ance on pumps output due to variations in
pulleys, belts and motors among manufactur-
ers.
1.
Select GPM required, then select
appropriatemotor and pump pulley from the
same line.
same line.
*Intermittent duty only! - Consult factory!
2.
The desired pressure is achieved by selecting
the correct nozzle size that corresponds with the
pump GPM.
pump GPM.
HORSEPOWER INFORMATION
We recommend that a 1.1 service factor be speci-
fied when s electing an electric motor as the power
source. To compute specific pump horsepower
requirements, use the following formula:
fied when s electing an electric motor as the power
source. To compute specific pump horsepower
requirements, use the following formula:
HP = (GPM X PSI) / 1440
LP122A/LP122A-4000/LP123 PULLEY SELECTION AND HORSEPOWER
REQUIREMENTS
GPM
PUMP
PULLEY
MOTOR
PULLEY
RPM
600 PSI
800 PSI
1000 PSI
1300 PSI 2000 PSI*
22.3
12.75"
3.95"
500
9.6
12.7
15.9
20.7
31.9
24.7
12.75"
4.35"
555
10.6
14.1
17.6
22.9
35.3
28.5
12.75"
4.95"
640
12.2
16.3
20.4
26.5
40.7
30.9
12.75"
5.35"
695
13.2
17.7
22.1
28.7
44.1
33.4
12.75"
5.75"
750
14.3
19.1
23.9
31.0
47.7
35.6
12.75"
6.15"
800
15.3
20.3
25.4
33.1
50.9
39.4
12.75"
6.50"
885*
16.9
22.5
28.1
36.6
56.3