GFI Software Fax Machine 12 Manual De Usuario

• 13 

, 

You can use the Eicon Diva Server Configuration Manager utility to 

setup advanced configurations such as sharing the Eicon Adapter 
between FAXmaker and Routing and Remote Access for dial-up 
access. For further information on this consult the Eicon 
documentation. 

The list of currently supported Brooktrout cards is available from 

, 

Current Brooktrout boards are Universal PCI (3.3/5 volts), however 

always check the technical details of the adapter to make sure the 
adapter is suitable for the server hardware. Old TR114 Boards can 
only be installed in 5v slots. 

, 

You must always install GFI FAXmaker software before installing 

Brooktrout or Trufax drivers. For more information refer to the 
‘Installing GFI FAXmaker’ chapter. 

The Brooktrout TR1034 cards are the latest fax cards from Cantata 
Technology. To install the card: 

1. Switch off the machine where you want to install the Brooktrout Fax 
card. Plug in the card following the instructions supplied with this 
hardware. 

2. Restart the machine. Should the ‘Add New Hardware’ wizard dialog 
come up, ignore it by pressing the Cancel button. 

3. Download the GFI FAXmaker Brooktrout TR1034 drivers 
(brooktrout_tr1034.exe) from 

NOTE: We recommend that you download and use these drivers 
(instead of the ones supplied with your hardware) so to ensure that 
you always have the latest drivers for your fax card. 

4. After you have downloaded the drivers, run set-up by double-
clicking on brooktrout_tr1034.exe. Setup will start by checking if 
there is any Brooktrout software already installed on the machine. 
Should it be the case, uninstall any existing Brooktrout software using 
the  Add/remove programs from the Control Panel. After all 
Brooktrout software has been uninstalled, restart the Brooktrout setup 
again by double-clicking on brooktrout_tr1034.exe.