Genius DU1/DU2 Manual De Usuario

 

Page 6/14 

 

•  Connect the internal antenna (supplied) and then position the antenna above 

the DAB Upgrade. Alternatively an external antenna can be connected 
(external DAB Band III antenna not supplied) 

•  Connect your DAB Upgrade, using the audio cable supplied, to the available 

input connector on your audio system. Alternatively you can connect via the 

optical output/input (SP/DIF) if your audio system is compatible (cable not 
supplied) 

•  Connect the power adapter provided to the DAB Upgrade. Now plug into the 

mains socket and switch mains on.  

•  Turn the DAB Upgrade on using the on/off button on the top of the unit – the 

display will now say ‘clock not set’  

•  Press the on/off button on the remote control. The ‘clock not set’ message will 

disappear and The DAB Upgrade will now perform a fast auto scan and tune 
into the first available station.  

•  If required, reposition the antenna in order to achieve the best reception. The 

optimum reception on any DAB product is normally achieved if the product is 
positioned close to a window. 

 
NB It is advisable to perform a ‘full scan’ to benefit from all the DAB channels 

available in your area (see Full Scan below) 
 

 
Your DAB Upgrade will perform an auto scan the first time you switch it on as 
detailed above. To ensure that you are receiving all of the channels available 

to you it is advised that you perform a Full Scan. 
 

•  To perform a Full Scan hold down the Scan button for three seconds. The 

DAB Upgrade will perform a full scan and return to the first available 

station 

 

 

 
•  If no stations are found your DAB Upgrade will provide you with menu 

options to repeat the scanning process or to allow you to tune manually 

•  If you still fail to find stations please check that you have DAB coverage in 

your area