Garmin PDAs & Smartphones G1000 Manual De Usuario
190-00498-07 Rev. A
Garmin G1000 Pilot’s Guide for Cessna Nav III
35
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
ANCE
AFCS
ADDITIONAL
FEA
TURES
TURES
APPENDICES
INDEX
D
ate
/t
ime
The Date/Time Box on the System Setup Page displays the current date and time and allows the pilot to set
the time format (local 12-hr, local 24-hr, or UTC) and offset. The time offset is used to define current local
time. UTC (also called GMT or Zulu) date and time are calculated directly from the GPS satellites signals
and cannot be changed. When using a local time format, designate the offset by adding or subtracting the
desired number of hours.
time. UTC (also called GMT or Zulu) date and time are calculated directly from the GPS satellites signals
and cannot be changed. When using a local time format, designate the offset by adding or subtracting the
desired number of hours.
Set the system time format:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time format field in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
2) Turn the large FMS Knob to highlight the time format field in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
ENT Key.
Set the current time offset:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box.
3) Turn the FMS Knobs to enter the time offset and press the ENT Key.
2) Turn the large FMS Knob to highlight the time offset field in the Date/Time Box.
3) Turn the FMS Knobs to enter the time offset and press the ENT Key.
D
isPlay
U
nits
The Display Units Box on the System Setup Page allows configuration of the measurement units used for
the following displayed data:
• Nav angle (magnetic, true)
When set to ‘MAGNETIC’, magnetic variation is figured into the displayed value. When ‘TRUE’ is
selected, no magnetic variation is calculated and a ‘T’ is displayed next to the value.
Affects the BRG field in the PFD Navigation Status Box.
Affects Current Heading, Selected Heading, and Selected Course boxes on the PFD.
Affects the BRG, DTK, TKE, TRK, and XTK fields in the MFD Navigation Status Box.
• Distance and speed (metric, nautical)
Affects the DIS field in the PFD Navigation Status Box and the range setting of the Inset Map.
Affects all distance and speed displays on the MFD with the exception of the displayed wind speed
displayed on the Navigation Map Page. Wind speed is affected on the Trip Planning Page.
• Altitude and vertical speed (feet, meters)
Affects all altitude and elevation displays on the MFD, with the exception of VNAV altitudes on the
Active Flight Plan Page.
• Temperature (Celsius, Fahrenheit)
Affects all temperature displays on the PFD.
Affects the temperature display on the Trip Planning Page. Does not affect the Engine Indicating
System display.