Garmin PDAs & Smartphones G1000 Manual De Usuario
190-00498-07 Rev A
Garmin G1000 Pilot’s Guide for Cessna Nav III
547
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
ANCE
AFCS
ADDITIONAL
FEA
TURES
TURES
APPENDICES
INDEX
8.8 ELECTRONIC CHECKLISTS
NOTE:
The checklists presented here are for example only and may not reflect checklists actually available
for the Cessna NAV III Aircraft. This material is not intended to replace the checklist information presented
in the AFM or the Pilot Safety and Warning Supplements document.
in the AFM or the Pilot Safety and Warning Supplements document.
NOTE:
Garmin is not responsible for the content of checklists. Checklists are created by the aircraft
manufacturer. Modifications or updates to the checklists are coordinated through the aircraft manufacturer.
The user cannot edit these checklists.
The user cannot edit these checklists.
The optional checklist functions are displayed on two levels of softkeys that are available on any MFD page.
Figure 8-82 Checklist Softkeys
CHKLIST
DCLTR
SYSTEM
MAP
The
CHECK Softkey label changes to UNCHECK
when the checklist item is already checked.
EXIT
CHECK
SYSTEM
EMERGCY
SHW CHRT
(Optional)
The MFD is able to display optional electronic checklists which allow a pilot to quickly find the proper
procedure on the ground and during each phase of flight. The system accesses the checklists from an SD card
inserted into the bezel slot. If the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the CHKLIST Softkey is
not available.
inserted into the bezel slot. If the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the CHKLIST Softkey is
not available.
Accessing and navigating checklists:
1)
From any page on the MFD, press the CHKLIST Softkey or turn the large FMS Knob to select the Checklist Page.
2)
Turn the large FMS Knob to select the ‘GROUP’ field.
3)
Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4)
Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5)
Turn the FMS Knob to select the desired checklist and press the ENT Key. The selected checklist item is
indicated with white text surrounded by a white box.
indicated with white text surrounded by a white box.
6)
Press the ENT Key or CHECK Softkey to check the selected checklist item. The line item turns green and a
checkmark is placed in the associated box. The next line item is automatically selected for checking.
checkmark is placed in the associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the desired checklist item.
Press the CLR Key or UNCHECK Softkey to remove a check mark from an item.
7)
When all checklist items have been checked, ‘*Checklist Finished*’ is displayed in green text at the bottom left
of the checklist window. If all items in the checklist have not be checked, ‘*CHECKLIST NOT FINISHED*’ will be
displayed in yellow text.\
of the checklist window. If all items in the checklist have not be checked, ‘*CHECKLIST NOT FINISHED*’ will be
displayed in yellow text.\