Extron electronic Multi-Graphic Processor MGP 464 Manual De Usuario

. 

Click the Save button to save the changes.  The Save button changes back to 
Edit

.

To set the MGP to require SMTP authorization before accepting any e-mail,

. 

To enable the SMTP authorization fields, click the Edit button at the right of 

the Mail IP Address field.  The Edit button changes to Save.

. 

Select the SMTP Authorization Required check box, located below the Domain 

Name field.  This enables the User Name and Password fields below the check 

box.

. 

In the User Name and Password fields, enter a user name and a password that 

senders must enter in order for the MGP to accept their e-mail messages.

 

For the User name, you can use any combination of letters, numerals, spaces, 

and symbols except the comma (,) and the single and double quotation marks 

(‘ and “).  For the password, you can use all characters except the comma.  The 

user name and password can each be from 1 to 30 characters.

N

. 

Click the Save button next to the Mail IP Address field to save your user name 

and password.

To remove SMTP authorization, click Edit, clear the SMTP Authorization Required 

check box, then click Save. 

The Firmware Upgrade screen enables you to install a new version of firmware to 

your MGP 464.  You can download the latest firmware version from the Extron Web 

site to your computer.  Appendix B provides more details on firmware updating.

There are two methods you can use to find out what firmware version is currently 

installed on your MGP 464:

•  

Watch the LCD window as you connect the MGP 464 

to a power source.  The first piece of information displayed on the screen is 

the firmware version (along with the product name).