Extron electronic Multi-Graphic Processor MGP 464 Manual De Usuario

The MGP 464 Windows-based control software program provides a convenient way 

to configure the inputs, output, windows, and images in each window.  It also lets 

you save and recall input and window presets, and perform nearly all the other 

functions that can be accomplished via the front panel controls, the SIS commands, 

or the MGP 464 Web pages.  
Using the software, you can do the following types of tasks to configure your MGP:

 — Specify a name; video signal type; size in pixels of the active 

video area; horizontal/vertical start points of the total video display area; and 

the windows 1, 2, 3, and 4 pixel sampling points (pixel phase) for each of the 

19 inputs.

 — Set output resolution, refresh rate, sync polarity, and 

signal type (RGBHV, RGBS, RGsB, or YUV bi-level and tri-level); select a test 

pattern;  and enable/disable blue mode in order to set video color and tint 

levels.

 — Position and size the four windows and the images within the 

windows, zoom in or out on the images/windows, and make fine adjustments 

to contrast, brightness, color, tint, and detail.

 — Create, save, and recall window and input presets.

 — Set window priority; border color; text label colors, size, 

and location; and transition effects for each window of the display.

 — Capture the entire display on the output screen and save it 

as a bitmap, to be recalled and used as a window background when needed.

The MGP 464 configuration software is provided on a CD that is delivered with 

your MGP 464 unit.  To use the software, you must install the program on your PC.  

Follow these steps:

. 

Insert CD ROM Disk B into your CD drive.  The disk should start 

automatically.  If it does not, open your Windows Explorer and double-click 

LAUNCH.EXE on the CD drive to start it.

. 

On the Software Products Disk B screen (shown on the next 

page), click the Software button.