Gateway E-9520T Manual De Usuario
www.gateway.com
55
7
Follow the instructions in
.
8
Remove the jumper from pins 1-2.
9
Follow the instructions in
.
Resetting BIOS passwords
To reset BIOS passwords, you must either reset and clear all BIOS settings or use the Clear
Password jumper. To reset all BIOS settings, follow the instructions in
Password jumper. To reset all BIOS settings, follow the instructions in
To clear the BIOS password(s):
1
Follow the instructions in
. Make sure
that you turn off the server, then unplug the power cord(s) and all other cables connected
to the server.
to the server.
2
Follow the instructions in
.
3
Install a jumper across pins 1-2 of header J59-A.
4
Follow the instructions in
.
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected to the
server.
server.
7
Follow the instructions in
.
8
Remove the jumper from pins 1-2.
9
Follow the instructions in
.
Caution
Moving the jumper while the power is on can damage your server. Always
turn off the server and unplug the power cords and all other cables before changing
the jumper.
the jumper.