Creative Desktop Wireless 8000 Guía Del Usuario

Installing Software

 

You need to install software to use Creative Desktop Wireless 8000. The following 

instructions are applicable to Windows XP, Windows 2000, Windows Millennium 

Edition (Me), Windows 98 Second Edition (SE) and Windows 98.
1. After you have connected Creative Desktop Wireless 8000, Windows will 

detect the USB device and install the required drivers automatically. 

2. Insert the Creative Desktop Wireless 8000 Installation CD into the CD-ROM 

drive. The CD supports Windows Autoplay mode and starts running 
automatically. If the CD does not run automatically, click Start 

→ 

Run. In the 

Run dialog box, type d:\ctrun\ctrun.exe (replace d:\ with the drive letter 

of your CD/DVD-ROM drive).

3. Select the applications to install, and then click the OK button.
4. Follow the instructions on the screen to install your Creative Desktop Wireless 

8000.

5. When prompted, restart your computer.
For your USB keyboard to work with MS-DOS-based utilities and non-windows 

modes, your computer must have USB Legacy Support (may vary depending on 

motherboard manufacturer) enabled in the BIOS.

Windows 98 and 98 SE 
users may be 
prompted by an Add 
New Hardware 
Wizard dialog box 
when Windows detects 
a USB device. Follow 
the instructions on the 
screen. You may need 
to insert the Windows 
Installation CD into the 
CD-ROM drive during 
installation. Some 
computers may be 
supplied without the 
Windows CD, but have 
the necessary files 
stored in 
c:\windows\
options\cabs 
(replace c:\ with the 
drive letter your 
Windows has been 
installed on).