Corega CG-WLBARGO Manual De Usuario
38
39
WLBARGO Manual
38
39
<Wireless setting/802.11g/b setting>
ESSID
ESSID is a name that makes wireless adapter identify
this Router . The default ESSID is [corega].
this Router . The default ESSID is [corega].
Mode
• 802.11b/g: auto connect in either 802.11b or 802.11g.
• 802.11g: connect in 802.11g mode.
• 802.11g: connect in 802.11g mode.
Channel
When there is interruption, other channels can be
selected.
selected.
TX Burst
Enable/Disable frame burst function. When it is
checked, transmit throughput will be improved. Only
work with corega WLCBGMO or WLUSB2GO.
checked, transmit throughput will be improved. Only
work with corega WLCBGMO or WLUSB2GO.
Hidden AP
when it's enabled, ESSID will not be seen in the
network.
network.
WMM
Select [Disable/Enable]to manage function of wireless
bandwidth
bandwidth
WDS
P to MP(P to MP bridge mode): setup the wireless
connection with another AP/Router.※Needs to enter
the MAC address of that AP, and each connected AP
needs to have the same setted channel.
AP Repeater (Repeater Mode): When signal is hard to
reach the other AP, users can set this product in AP
repeater mode.※Need to enter the MAC address of
the other AP, and set the same ESSID.
connection with another AP/Router.※Needs to enter
the MAC address of that AP, and each connected AP
needs to have the same setted channel.
AP Repeater (Repeater Mode): When signal is hard to
reach the other AP, users can set this product in AP
repeater mode.※Need to enter the MAC address of
the other AP, and set the same ESSID.