Compex Technologies WP11A+ Manual De Usuario
Chapter 4
Software Configuration
12
Chapter 4
Software Configuration
After setting up the hardware, install a browser on the PC or workstation. Make sure that the
TCP/IP protocol is installed and configured for Internet access. Please refer to Appendix II.
TCP/IP protocol is installed and configured for Internet access. Please refer to Appendix II.
4.1
Login into Web-based Interface
Compex has developed an utility configuration software, uConfig, that provides hassle-
free access to the web-based configuration interface. The uniqueness of this program is
that it does not require any alteration to the TCP/IP configuration on your computer.
free access to the web-based configuration interface. The uniqueness of this program is
that it does not require any alteration to the TCP/IP configuration on your computer.
Connect the WP11A+ to your computer via a crossover UTP cable.
As pre-configuration of TCP/IP is not required, you just simply activate the program to
get to the configuration page.
get to the configuration page.
To login into Compex WP11A+’s web-based interface,
1. Insert the Product CD provided into your CD-ROM. This will automatically open
up the Welcome Page.
2. Click on the Drivers and Utilities option and select uConfig program.
NOTE
In the event that the program cannot be found, please explore this directory
path, X:\utility\ (where X is the CD-ROM drive) to access the program.
In the event that the program cannot be found, please explore this directory
path, X:\utility\ (where X is the CD-ROM drive) to access the program.