Cnet ecopy Printer/Fax/Scanner/Copier Manual De Usuario

Using Wireless LAN

189

TTTT

Enter “scanner” for the user name,
enter the password, and then click
[OK]

Note

❒ User name is fixed to “scanner”.
❒ The initial factory default pass-

word is “password”. You can
change the password using
[Configuration]

→ [Basic Settings]

→ [Password].

The setup screen appears.

UUUU

Click [Basic Settings], and then
[TCP/IP]

on the sub-menu.

VVVV

Make settings to each of the setup
items on the screen.

Reference

⇒ p.52 “System Settings”

❖

❖ LAN Type

Switch between network inter-
face board and wireless LAN
(IEEE 802.11b) board. Be sure to
set this item to “IEEE 802.11b”.

❖

❖ Network Boot

Select [DHCP] to use the DHCP
server to make network settings
automatically. When using DH-
CP, the IP address, subnet
mask, and default gateway ad-
dress obtained from the DHCP
server are used.
Select [NONE] to make network
settings manually.

❖

❖ Communication Mode

S el e c t t h e c o m m u n i c at i o n
mode.
• Infrastructure mode

A method of communicating
with other computers via an
access point. The SSID must
be the same as the one set for
the access point.

• Ad hoc mode

A method of communicating
with other computers, peer
to peer, without an access
point. The same communica-
tion channel must be used for
all computers.

• 802.11 Ad hoc mode

A method of communicating
with other computers, peer
to peer, without an access
point. The same communica-
tion channel and SSID must
be used for all computers.

❖

❖ SSID

Enter the SSID (Service Set Iden-
tifier) you want to use, using up
to 32 characters. The SSID cur-
rently in use appears in paren-
theses.
This information appears if
[802.11 Ad hoc mode]

or [Infra-

structure mode]

is selected in the

[ Communication Mode ]

list.

The SSID is an identifier used
when connecting between an
access point and a wireless LAN
client. Only a wireless LAN cli-
ent and an access point that
have the same SSID can com-
municate with each other.

❖

❖ Channel

If [802.11 Ad hoc mode] or [Ad hoc
mode]

is selected in the [Commu-

nication Mode]

list, select a com-

munication channel.
The channel is a set radio fre-
quency used for wireless LAN
(IEEE 802.11b). Computers us-
ing the same channel can com-
municate with each other.