Clarity Video Eyeware 87392-11 Manual De Usuario
Clarity User Guide,
March 1, 2011 - Rev. 1.06
Page 28
There are two other buttons that will allow you to check and save job log data for analysis of
VC labels:
VC labels:
• View Log
• Copy Logs to Flash Drive
To copy or look at the log, you must have the Activate Job Log Data box checked. This
screen also includes a box to allow the machine to boot up completely past Windows and
open into the Clarity software. There is a Brightness Image Level that is set at the factory to
185. There is also a box called Display Options. These parameters should only be changed
with input from Technical Support. Advanced screen functions are discussed in detail in
Chapter 5.
To copy or look at the log, you must have the Activate Job Log Data box checked. This
screen also includes a box to allow the machine to boot up completely past Windows and
open into the Clarity software. There is a Brightness Image Level that is set at the factory to
185. There is also a box called Display Options. These parameters should only be changed
with input from Technical Support. Advanced screen functions are discussed in detail in
Chapter 5.
The Technician Screen
Figure 3.8 – Technician Screen
When you select the Technician tab, a number keypad appears. Enter the password (082379)
to allow entry into the screen. This screen contains a wide variety of features that will be
useful in diagnostics. Contact Technical Support before making any changes to this screen.
This screen also contains a Focus Camera button that is used as a preliminary calibration of
the camera focus to optimize the camera's ability to recognize clearly the edge of the lens.
This, in turn, optimizes diameter checks and affects power readings.
to allow entry into the screen. This screen contains a wide variety of features that will be
useful in diagnostics. Contact Technical Support before making any changes to this screen.
This screen also contains a Focus Camera button that is used as a preliminary calibration of
the camera focus to optimize the camera's ability to recognize clearly the edge of the lens.
This, in turn, optimizes diameter checks and affects power readings.