Clarity Video Eyeware 87392-11 Manual De Usuario

Clarity User Guide,

 

March 1, 2011 - Rev. 1.06 

                    

           Page 6 

 
  9. 

Main fuse (located on rear bulkhead) 

10. 

Glass plate (See Fig. 1.5)   Remove and install in the blocking chamber as described 
later in this chapter.  

11. 

Light shield (blocking arm) 

12.       Light shield (left gripper) 
13.       Light shield (right gripper) 
14.       Bag of screws for the light shielding 
15.       Clarity User Guide (not shown in Fig. 1.4) 
 
When the Clarity is prepared for shipment (by the factory or the user), its mechanism must be 
secured against movement caused by jarring or shocks to the shipping carton.  Units may use 
one of two means for doing this: (1) molded foam blocks within the blocking chamber, or (2) 
a clamping device attached to the blocking mechanism.  In either case, the shipping restraints 
must be removed prior to using the Clarity, and must be re-installed prior to shipping the unit, 
should that prove necessary.  

 
Foam Shipping Blocks in the Blocking Chamber   
 
Remove the two foam blocks that hold the mechanism in place during shipment.  Note how 
they are installed in the event that the Clarity needs to be shipped from your location.  Call 
Technical Support for help in packing the machine for shipment.  Figures 1.1a and 1.1b show 
how the foam shipping blocks are installed.