Capital Cooking PSCT36 Manual De Usuario
8
using your new cooktop: BBQ section
NOTE:
The BBQ is only available on model # PSCT364B,
PSCT486B, and PSCT484BG.
PSCT486B, and PSCT484BG.
CAUTION!
Use extreme care when placing the grill components
into the grill compartment. Avoid contacting the
ceramic igniter that could break, preventing
operation of the grill.
Use extreme care when placing the grill components
into the grill compartment. Avoid contacting the
ceramic igniter that could break, preventing
operation of the grill.
DO NOT leave the grill unattended while in use.
DO NOT use charcoal briquettes, ceramic plates, or
coals of any kind.
coals of any kind.
After removing all packaging materials, check
to be certain that the grill components are correctly
assembled in the grill box. The grill grates, stainless
steel radiant tray and the burner are assembled in the
grill box from the factory.
to be certain that the grill components are correctly
assembled in the grill box. The grill grates, stainless
steel radiant tray and the burner are assembled in the
grill box from the factory.
NOTE:
Your grill racks are constructed from stainless steel and
have been electro-polished to achieve a brilliant finish.
After the first use, discoloration will occur. This is natural
and unavoidable
have been electro-polished to achieve a brilliant finish.
After the first use, discoloration will occur. This is natural
and unavoidable
COOKING ON THE BBQ:
The burner should light within approximately
5 seconds.
Preheat the grill for approximately 10 minutes minimum.
The hot grill sears the food, sealing in the juices. The
longer the preheat time, the faster the meat browns and
the darker the brand marks.
The burner should light within approximately
5 seconds.
Preheat the grill for approximately 10 minutes minimum.
The hot grill sears the food, sealing in the juices. The
longer the preheat time, the faster the meat browns and
the darker the brand marks.
Grilling requires high heat for optimum results. High heat
is necessary for searing and proper browning. Most
foods are cooked at higher heat settings for most of the
cooking time. However, when grilling large pieces of
meat or poultry, it may be necessary to turn the heat to a
lower setting after the initial browning. This cooks the
food thoroughly without burning the outside.
is necessary for searing and proper browning. Most
foods are cooked at higher heat settings for most of the
cooking time. However, when grilling large pieces of
meat or poultry, it may be necessary to turn the heat to a
lower setting after the initial browning. This cooks the
food thoroughly without burning the outside.
Foods cooked for a long period of time or basted with a
sugary marinade may need a lower heat setting near the
end of the cooking time.
sugary marinade may need a lower heat setting near the
end of the cooking time.
After grilling and the food has been removed, turn the
knob to HI and burn off any excess grease that may have
accumulated on the stainless steel radiant.
knob to HI and burn off any excess grease that may have
accumulated on the stainless steel radiant.
Use a brass wire brush, dipped in hot water, to loosen
food particles from the grate.
food particles from the grate.
GRILLING SUGGESTIONS:
a) Trim any excess fat from the meat before cooking.
FATTY MEATS increase the likelihood of flare-ups.
Cut slits in the remaining fat around the edges at
2” (51 mm) intervals.
a) Trim any excess fat from the meat before cooking.
FATTY MEATS increase the likelihood of flare-ups.
Cut slits in the remaining fat around the edges at
2” (51 mm) intervals.
b) Brush on basting sauces towards the end of
cooking.
cooking.
c) Add seasoning or salt after grilling. Early salting
dries out meat.
dries out meat.
d) Use a spatula or tongs instead of a fork to
turn the meat. A fork punctures the meat and lets
the juices flow out.
turn the meat. A fork punctures the meat and lets
the juices flow out.
e) After the juices begin to bubble to the surface,
turn the meat only once. This helps keep the
juices in the meat.
turn the meat only once. This helps keep the
juices in the meat.
f) Some pieces of meat and poultry cook faster than
others. Move those pieces to the cooler area of the
grill until the rest have finished.
others. Move those pieces to the cooler area of the
grill until the rest have finished.
g) The doneness of meat is affected by the thickness
of the cut. Chefs say it is impossible to have a rare
doneness with a thin cut.
of the cut. Chefs say it is impossible to have a rare
doneness with a thin cut.
THE GRILL RACK:
The grill rack is a double sided, two position grate.
Use the concave side (channels up) for meats of
higher fat content (Steaks, hamburgers, sausage
patties, etc.); use the convex side (channels down) for
foods of lesser fat content (fish, vegetables, fruits, etc.)
The grill rack is a double sided, two position grate.
Use the concave side (channels up) for meats of
higher fat content (Steaks, hamburgers, sausage
patties, etc.); use the convex side (channels down) for
foods of lesser fat content (fish, vegetables, fruits, etc.)
HANDLING EXCESSIVE FLARE- UPS:
The intense heat needed for grilling may also cause
flare-ups, due to grease and basting sauces dripping
on the stainless steel radiant plate.
The intense heat needed for grilling may also cause
flare-ups, due to grease and basting sauces dripping
on the stainless steel radiant plate.
If flare-ups occur, use a long handled spatula to move
the food to another area of the grill.
the food to another area of the grill.
Should flare-ups become excessive, remove the food
from the grill and turn off the burner.
from the grill and turn off the burner.
Excessive flames occur when cooking meat with high
fat concentration, i.e. 30% ground beef, untrimmed
steaks, lamb chops, etc.
fat concentration, i.e. 30% ground beef, untrimmed
steaks, lamb chops, etc.
Be cautious when turning meat over.