Weber 61638 Manual De Usuario

 WARNINg: Do not use a wrench

to loosen the connection. Using
a wrench could damage the
regulator coupling and could
cause a leak.

DISCONNECTION OF HOSE FROM GAS SOURCE

See owner’s Guide for complete gas connection and removal instructions.

EXPORT GRills

LP UNITS:

A)  Make sure gas supply is turned off at source.
B)  Disconnect LP cylinder from inside of cabinet base.
C)  Remove LP cylinder from cabinet base.

Ng UNITS:

A) Make sure gas supply is turned off at source.
B) Slide collar of quick-disconnect back to remove

flexible gas supply hose from gas source.

LPg UNITS:
 WARNINg: Make sure that the LPg cylinder or regulator valve is

closed.

A) Remove the gas supply cylinder by shutting off the gas supply and disconnecting

the hose and regulator assembly from the cylinder.

Identify your regulator type. Follow the disconnection instructions for that regulator.

Disconnect by Turning Anti-Clockwise

Unscrew regulator from cylinder by turning fitting anti-clockwise

(1).

Disconnect by Turning Clockwise

Unscrew regulator from cylinder by turning fitting clockwise

(2) (3).

Disconnect by Turning Lever

Turn regulator lever to the down/off position

(4). Push in on regulator lever (5) until

it releases from the cylinder

(6).

Disconnect by Sliding Collar

Make sure regulator lever is in the off position

(7) (9). Slide the collar of the

regulator up

(8) (10) to disconnect from the cylinder.

B) Remove LPG cylinder.

Ng UNITS:

A) Make sure gas supply is turned off at source.
Manual Shut-Off Valve
B) Disconnect flexible gas supply hose from manual shut-off valve (11). Refer

to instructions included with your flexible gas supply hose.

— OR —
gas Outlet Valve
B) Disconnect flexible gas supply hose from gas outlet valve (12). Pull plug out

to disengage hose from cover plate. (This automatically shuts off gas.) Refer
to instructions included with your flexible gas supply hose.

NORTH AMERiCAN GRills