Harbor Freight Tools 40129 Manual De Usuario

SKU  40129

                   PAGE 3

ASSEMBLY INSTRUCTIONS FOR BACK WHEELS

1.

Remove the plastic bag from the Four Wheel Cart. See Figure A. Cut all the tie straps
holding component parts. Open Cart (#1) and organize parts for assembly.
See Figure B & C.

Figure C

#4

#2

#5

#6

}

Figure B

#1

Figure A

#3

{

2.

Turn Cart around and on the handle side, slip the Longer Axle (#2), Figure C,
through the right and left axle-support on lower back frame, matching up the small
holes in the Longer Axle (#2) and axle-support. Place Cotter Pin through holes to
secure the Longer Axle. See Figure D & E.

axle-

support

#2

match up small

holes

for Cotter Pins

Hub

3.

With Cotter Pin in place, use “Assembly Order”  shown in Figure F, placing Washer on
outer side of axle-support, then Large Spring, Washer, Large Wheel (#4), Washer and
finally Wheel Hub. Tap on Hub to hold Wheel securely in place. With
pliers, bend both ends of the Cotter Pins so it does not slip out of place.

4.

On the opposite side, repeat instructions 3. Next to the axle-support, place Washer to
outside of axle-support, Large Spring, Washer, Large Wheel (#4),
Washer and finally Wheel Hub. Tap to secure.
Bend both ends of Cotter Pins.

 Assembly Order (#6 Hardware Packet)

    1.) Cotter Pin

5.) Wheel

    2.) Washer

       6.) Washer

    3.) Spring

       7.) Wheel Hub

    4.) Washer

#4

Figure D

Figure E

Figure F

Left Side

“Assembly Order”