Sony NAC-SV10I Manual De Usuario

Select “Wired LAN.”

The unit automatically starts setting up the 
network connection.

When “Save settings and check 
connection. Press ENTER to 
continue.” appears, press ENTER.

It may take a while for the unit to complete 
the network settings.
When the network settings have been 
completed, “Complete.” appears.
If you are making the initial settings, the 
“Date&Time” display, step 5 of “Performing 
initial setup operations,” appears. Go back to 
page 21 and continue the initial setting 
process.

Make the server settings.

To listen to audio content stored on the server 
through the network that you have set up in 
this section, you need to set up your server 
(page 35).

You may have to use a fixed IP address and proxy 
server, depending on your home network settings, 
or the specifications of the Internet service 
provider.
For details on the input values in the following 
procedures, refer to the operating manual of the 
respective device or the information provided by 
your Internet service provider.

The unit is set to obtain the IP address 
automatically as the factory setting, however, you 
can use a fixed IP address, depending on your 
network settings.

Press 

SETTINGS

 to enter

 the 

settings menu and select “Network 
Settings.”

When “Playback and network 
functions cannot be used during the 
setup. Press ENTER to continue.” 
appears, press ENTER.

When “

” is displayed, the message is 

continued to the next page. Press 

m to see the 

entire text string.

Select “Tools” - “Advanced Settings.”

Select “IP Address Settings” - 
“Manual.”

Enter the values for “IP Address,” 
“Subnet Mask” and “Default 
Gateway.”

When you press ENTER after you enter 
“Default Gateway,” the DNS server settings 
display appears.
For details on how to input characters, see 
“Entering text” (page 18).

Enter the values for the “Primary 
DNS” setting.

When “Set Second. DNS?” appears, 
select “Yes.”

If you do not have to set the secondary DNS 
server setting, select “No.”