Harbor Freight Tools 7 in. 10 Amp Heavy Duty Digital Variable Speed Polisher Manual Del Producto

Page 11

For technical questions, please call 1-888-866-5797.

Item 66615

SAFETY

PERA

TION

AINTENAN

SETUP

Setup - Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM AccIDENTAL OPERATION:

Turn the Power Switch off and unplug the Polisher from its electrical outlet before

assembling or making any adjustments to the tool.

Note: For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

Assembly

SPINDLE

LOcK (34)

MOUNTING

DISc (51)

AUXILIARY HANDLE (36)

GEAR BOX

(32)

Figure A

1. To attach the Mounting Disc (51) to the Polisher,

press and hold the Spindle Lock (34). Screw the

Mounting Disc onto the Spindle (50) of the tool.

Then release pressure on the Spindle Lock.

2. To attach the Auxiliary Handle (36), screw the

Handle firmly into the threaded mounting hole

located on either side of the Gear Box (32).