Harbor Freight Tools 7 in. 10 Amp Heavy Duty Digital Variable Speed Polisher Manual Del Producto
Page 14
For technical questions, please call 1-888-866-5797.
Item 66615
SAFETY
O
PERA
TION
M
AINTENAN
c
E
SETUP
Sanding Instructions
TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands.
1. Wipe the work surface clean of all dirt and debris,
especially that of previous
coarser sanding sessions, which will scratch
the surface of a finer grit sanding session.
2. Attach the desired grit Sanding Disk
(sold separately) onto the Backing Pad.
3. Make sure that the Switch is in the off-
position, then plug in the tool.
4. Turn the Power Switch to its
“ON”
position to start the tool.
5. Wait until the tool has reached full speed,
then gently contact the surface.
6. Keep heavy pressure off of the tool when operating.
Allow the tool to do the work.
7. Move the tool in a uniform pattern up and down or
side to side while sanding to ensure even sanding.
8. Periodically, stop the tool and check for disc wear.
Replace worn sanding discs as needed.
9.
TO PREVENT AccIDENTS, AFTER USE:
Turn off the tool.
WARNING! Allow the tool to come to a complete
stop before setting it down.
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.