Chamberlain RWA300R Manual De Usuario

The Alert uses a Passive Infra-Red sensor to detect 
movement of people and vehicles, while allowing 
small animals to pass through undetected.

Base Station

Passive Infra-Red (PIR) 

Motion Sensor

1

Swivel Bushing

Mounting Plate

AC Adapter

Rubber Pads

Sun/Rain Shield

®

Relay Output 
Contacts

AC Adapter

Base Station Switch #1
Base Station Switch #2

Learn Button

Antenna

Mute/Off 
Button

Battery: The AA batteries (not provided) in the PIR 
Motion Sensor will last up to 2 years depending on 
use (Lithium batteries recommended for colder 
environments). If Base Station battery (optional) is 
low, it will beep every few minutes. Replace with 
9-Volt battery (not provided). For peak performance 
inspect batteries annually and replace as needed.

Programming Additional PIR Motion Sensors: The 
Base Station can learn the code of up to 3 additional 
PIR Motion Sensors, responding with unique buzzes. 
To program additional PIR Motion Sensors see 
Step 6. 
To order additional PIR Motion Sensors call 
1-800-528-9131.

Clear Memory: Press and hold the Learn Button on 
the Base Station until 3 beeps are heard.

On/Off: To turn Base Station off hold down the Mute 
Button until it powers down. The Base Station can be 
turned on by pressing the Mute Button.

Mute: Press and release the Mute Button to put the 
Base Station into Sleep Mode for one hour. After an 
hour it will activate automatically.

1

2

ON

OFF

OFF Buzzer 

Off

ON 

Buzzer On (Default)

OFF Long 

Buzz

ON  

Short Buzz (Default)

To prevent possible SERIOUS INJURY or DEATH from 
electrocution, outputs are suitable ONLY for controlling low 
voltage devices, 24V max, ac or dc.