Brother NV6000D Manual De Usuario
ATTACHING THE EMBROIDERY FRAME
204
ATTACHING THE EMBROIDERY FRAME
Press
o
o
o
o
in this order to display a video
example of attaching the embroidery frame (see page 34). Follow the steps explained below to complete
the operation.
a
Press the “Presser Foot Lifter” button to
raise the presser foot.
raise the presser foot.
b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
right edge of the embroidery frame holder.
a Embroidery frame holder
b Embroidery frame guide
b Embroidery frame guide
c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’s
with the holder’s
.
a Arrow mark
d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
with the frame to secure the embroidery
frame in the embroidery frame holder.
a Frame-securing lever
Note
• Wind and insert the bobbin before attaching the embroidery frame.
CAUTION
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
sewing until you lower the frame-securing
lever.
sewing until you lower the frame-securing
lever.