Zerotherm ZERO THERM GX810 Manual De Usuario

◆

◆ Installation for standard user

Installation for standard user

1. Attach the memory heat sinks

Remove the previous VGA cooler from your VGA
card.
Attach 8 pcs of memory heat sinks on the RAM
of your VGA card like <picture 1>.

※ The thermal tapes on the memory heat sink

ate not reusable because the adhesiveness will be
reduced after their first attachment.

2. Paste the thermal grease on your GPU (or VPU)

Paste the thermal grease on the core your GPU (or
VPU) of your VGA card like <picture 2>.

3. Install the

3. Install the ④

④

④ standard knurling

standard knurling

standard knurling----screws

screws

Install the end of ④ standard knurling-screws on
the VGA cooler like <picture 3>.

※Please check the list of Compatible VGA Card &

Screws Installation Holes before installing the
screws.

4. Fasten the

4. Fasten the ⑤

⑤

⑤ standard knurling

standard knurling

standard knurling----nuts

nuts

Insert the VGA cooler into the holes on your VGA
card and fasten the standard ⑤ knurling-nuts like
<picture 4>

※Make sure that the base of the VGA cooler and

the GPU (or VPU) are completely in contact with
each other.

※Excessive force may result in malfunction or

damage to the core of your GPU (or VPU).

5. Connect the fan

5. Connect the fan----connector

connector

Insert your VGA card into the PCI (or AGP) slot
and connect the 3-pin connector to your
motherboard or to your power supply unit like
<picture 5>.

※ Do not connect the 3-pin connector to your

VGA card.

Installation Guide

Please read this installation guide carefully before installation