Siemens TV Converter Box 611 Manual De Usuario

 

Interfaces 

 

8.2 Electrical connections 

 
The cables for the power connection are brought out at the front of the stator (B side). The 

open cable ends must be connected in a terminal box, which must be provided by the 

machine manufacturer. Sufficient installation space must be provided in the axes 

construction. Standard MOTION–CONNECT cables, which are available with the standard 

range of accessories for the drive system, can be used from this EMC-compliant terminal 

box (minimum degree of protection: IP54). 

8.2.1 

Power connection 

Connection assignment 

Table 8- 4 

Power connection for torque motor 

Converter 

Torque motor/stator 

U2 

U 

V2 

V 

W2 

W 

For information on the power connection, refer also to the system integration images 

contained in the chapter titled "System requirements". The rotor turns clockwise if the torque 

motor is connected in phase sequence U, V, W. Also refer to "Direction of rotation" in 

Chapter "Technical features".  

8.2.2 

Signal connection 

No direct connection of the temperature monitoring circuits! 

 

DANGER 

 

The temperature monitoring circuits represent a risk of electrical shock! 
A direct connection of the temperature monitoring circuits Temp-F and Temp-S at the 

encoder connectors X411/X412 of the SIMODRIVE control module does not satisfy the 

regulations for protective separation in accordance with EN 61800-5-1. A connection of the 

temperature monitoring circuits Temp-F and Temp-S at the encoder connectors X411/X412 

of the SIMODRIVE control module is therefore not permitted without the use of a suitable 

protection module (e.g. SME9x). 

 

Temperature sensor connection via SME9x 

A connector is used to connect the signal cable to the SME9x (Sensor Module External), 

whose output is connected at the converter. For more information, see the system 

integration images contained in the chapter titled "System requirements", as well as the 

connection overview below.  

1FW6 Built-in torque motors 
Configuration Manual, 05/2009, 6SN1197-0AD00-0BP7 

145