Sunbeam BVSBWH1001 Manual De Usuario

Descargar
Página de 8
T
o
 B
oil
 W
aTer
Note: Do not use for heating oil or butter.
1    Fill hot pot with the amount of cold water needed or to the 
Maximum Fill Indicator located on the inside of the unit. 
Note: Keep hot pot level when filling. Hot pot should always be 
unplugged when filling with water. 
2    Place hot pot on a dry, level, heat resistant surface. Cover and 
turn thermostat control dial to High. 
3    Plug into 120 volt AC outlet. Water will soon come to a full 
boil. 
Note: DO NOT ALLOW TO BOIL DRY. 
4   Unplug before emptying water.
5    To avoid spilling of hot liquid, keep cover in place while 
pouring.
Note: Do not overfill. Do not operate when empty.
CAUTION: This appliance is intended to hold hot or boiling 
liquids. To avoid burns or other injuries, extreme caution must be 
used when moving an appliance containing hot or boiling liquids. 
Keep away from children when operating.
f
eaTUres
 
of
 Y
oUr
 h
oT
 P
oT
T
o
 h
eaT
 M
ilk
 o
r
 C
anned
  
C
onvenienCe
 f
oods
1    Place food or milk in unit. 
2    Turn thermostat control dial to Low or to desired setting. 
Note: Using the LOW Setting will prevent boil-overs and burning. 
3    Plug into 120 volt AC outlet and allow food or milk to heat, 
stirring frequently. 
4    Unplug before emptying contents. To avoid spilling of hot 
liquid/ food, keep cover in place while pouring.
Note: Do not scratch the non-stick cook surface finish with metal 
implements. Wood or plastic coated spatulas are best. If you use 
plastic tools, make sure they are suitable for use on hot surfaces.
CAUTION: The appliance and accumulated steam will be hot. 
Open cover carefully to let steam escape safely.
h
oW
 T
o
 C
lean
NOTE: Always unplug unit before washing. Never immerse in 
water.
1   Wash lid in soapy water. 
2    Wash inside of unit with soapy water. Rinse and dry 
thoroughly.
3   Wipe outside with a damp cloth. 
Note: DO NOT use abrasive cleaners on non-stick cook surface or 
any plastic piece. 
4    To remove food residues, use a nylon scourer. NEVER use 
abrasive powder cleaners or metal scouring pads as these will 
damage the non-stick coating.
C
D
E
A
B
A. Heating Plate
B. Pour Spout
C.  Thermostat 
control dial
D. Power Cord
E. Lid
4
5
BVSBWH1001_12ESM1.indd   5-6
3/29/12   9:09 AM