Siemens NO NAME HE2425 Manual De Usuario

Cleaning and Maintenance

English 38

5. REMOVE RACKS appears in the display 

as a reminder to remove oven racks.

6. Press START again to begin the self-

clean.

Note: The door locks at the beginning of the 
cycle; The door lock symbol will appear in the display at this point. If door does not 
lock, press OFF and do not self-clean; phone service.

Note: The time of day must be correctly set for this option to work properly. See 
section “Setting the Clock” in “Setting Up Your Range”.

1. Press COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press START. 
3. The default cleaning time is 4 hours. To change cleaning time, turn knob to 

change number of hours. Otherwise, continue to step 4.

4. Press START.
5. Turn knob until DELAYED CLEAN mode 

appears. Press START. 

6. SELF CLEAN END appears in the display.
7. Turn knob to enter the time of day you want 

the self-clean to end: Set hours, press time, 
set minutes.

8. Press START. The display will remind you to 

remove oven racks.

9. Press START. The display shows DELAYED CLEAN. The self-clean will 

automatically start at the appropriate time.

Note: In the Delayed Self-Clean Mode, the door latch automatically activates at 
the beginning of the cycle. The door lock symbol will appear in the display.

Note: The oven lights do not operate in the Self-Clean mode.

1. At the end of the programmed cleaning time, the oven will automatically turn 

off. SELF CLEAN END appears in the display. Press OFF to clear.

Note: The door will not unlock until the oven reaches a safe temperature.

2. The self-clean mode may produce ash which will settle in the bottom of the 

oven. If this happens, remove ash with a damp cloth before using the oven.

3. Wipe rack edges with cooking oil to allow for proper glide. Wipe off excess.

After self-cleaning, the entire oven can be safely cleaned with a soapy sponge, 
rinsed and dried. If stubborn soil remains, follow the guidelines on this page.

•

Always use the mildest cleaner that will remove the soil.

•

Rub metal finishes in the direction of the grain.

•

Use clean, soft cloths, sponges or paper towels.

•

Rinse thoroughly with a minimum of water so it does not drip into door slots. 

•

Dry to avoid water marks.

•

Do not use caustic cleaners such as Easy Off®. They may etch the surface.

The cleaners listed below indicate types of products to use and are not being 
endorsed. Use all products according to package directions.