Philips MICROLUX HC8900 Manual De Usuario

Make sure that the pull tab of the hearing capsule is positioned on 

top of the pull tab of the customised sleeve.

  

 Switch on the Microlux by setting the on/off switch to the ‘on’ 

position. (Fig. 3)

You can check whether the Microlux is working by holding it in the 

closed palm of your hand. You will hear a whistling sound if the 

Microlux is functioning. If it  does not whistle, check the sound output 

and the position of the battery.

If you have two Microlux hearing capsules, make sure you do not 

switch them, because the programming for the left ear is often different 

from that for the right ear.  

 1 

 Grip the assembled Microlux by both pull tabs and insert it loosely 

into the auditory canal. (Fig. 4)

The Microlux with the red identification dot is for your right ear, 

the Microlux with the blue identification dot is for your left ear.

The identification dot must point upwards when the Microlux is in 

your ear.

  

 Place your forefinger or thumb behind both pull tabs at the 

location of the programming contact and press the Microlux 

further into your ear.

You may have to guide the Microlux upwards and backwards when 

doing so, depending on the shape of the auditory canal.

If necessary, stretch the auditory canal with your other hand by 

pulling your auricle upwards and backwards.

It may help to open your mouth wide when inserting the Microlux.

If necessary, massage the Microlux with the point of your forefinger 

to ease it further into the ear.

,

,

,

,

,

,

,