Pioneer GEX-AIRWARE1 Manual De Usuario

My XM Time-shifting Memory Mode

2go: Store and play back

Your AirWare lets you store up to five hours of programming

and play it back at a later time or where live signal

reception is limited. Listen to XM wherever you are,

whenever you prefer.

TO STORE BY PRESSING

ONE BUTTON:

1. Turn on your AirWare and

select a channel.

2. Press the “2go” button. To

prevent you from accidentally

recording over a previously

stored program, your AirWare

will ask you to confirm. Press

the “

2go” button again. The

center of the top line of your

AirWare’s screen switches from

“LIVE” to “REC.”

TIP: Press and hold the “2go” button and you can

automatically bypass the second confirmation “

2go”

button press.

3. To stop storing and continue with live programming,

press the “

2go” button again. The display reverts to

“LIVE” mode.

TO PLAY BACK:

1. Press the ”

mode” button.

Your AirWare switches from

“LIVE” to “MY XM” and will

begin to play back from the

beginning or where you last

stopped or paused.

2. “MY XM” holds up to five

hours of programming. Press

either the “ ” or “ ”

button to skip to the previous

or to the next song.

3. You can also rotate the dial to

view a list of the stored artists

and songs. Simply highlight an

artist with the dial, then press the dial in to listen to it.

4. To return to LIVE listening, press the “

mode” button

again.

Scheduling a session

You can set your AirWare to store XM programming at

a specific time using the “MY XM” Time-shifting

Memory Mode.

1. Press the “menu” button and use the dial to select

“MY XM.”

2. Select “Schedule MY XM.”

3. You can schedule up to two sessions. Choose

“Session 1” or “Session 2.”

4. Rotate the dial to change and press the dial in to fill

in the “How Often?,” starting time, ending time, and

channel fields. The “How Often?” option allows you

to activate the session “Once,” “Every Day,” or “Off”

(postponing until another time).

TIP: You can use the number buttons to enter the channel

number. You can also use the up, down, and XM buttons on

the remote to enter time and make selections.

5. Set up the second

session, if you desire.

The combined time

for both sessions

should not exceed five

hours in one day and

the sessions may not

overlap each other.

Your AirWare will advise

you if either condition occurs, and will give you another

chance to schedule the sessions.

Turn off your AirWare. When the session starts, the

display will show “Session 1 (or 2) Recording.” If your

AirWare is already on when the session is supposed to

start, AirWare skips the session and does not interrupt

your listening. When the session starts, it writes over

the oldest stored programs first, ensuring that you’re

always listening to the freshest programming.

Important!: You can only store a session if your AirWare is

turned off and plugged into the home stand, with the

AC adaptor connected and receiving power. You must

connect the home antenna to receive the XM signal.

TIP: If you set the alarm to turn on your AirWare before a

session is scheduled to start, that session could be cancelled

if the AirWare is on and not off to begin the session.

7. To erase the stored content, choose the “Clear MY

XM” option under the “MY XM” menu. All previously

recorded content can no longer be accessed.

PI Radio Artwork

Note: Keypad Artwork for laser etching of painted surfaces

02.16.04

Note: Faceplate Artwork IMD parts

Note: Power and scroll wheel for screen printing - COLOR TBD

Note: Phone and RF icon are be to molded in to the receiver