Panasonic Attune Guía De Operación

32

You hear your echo in head-
set earpiece when you speak
into microphone of headset.

Outside speaker and microphone may not be properly installed.

• Be sure speaker and microphone are isolated from each

other, and tightly mounted with enough foam packed around
each of them to absorb vibrations.

–

Outbound and/or inbound audio level may be set too high.

• Set outbound audio level just high enough to be heard by

customers. Lower inbound audio to comfortable level.

Note: Lower inbound audio setting may also prevent feedback

noise.

–

Echo canceller may be OFF or Effect level may be "LOW".

• Set echo canceller level properly.

Note: Default setting is "MAX"(LED:RED))

27

You hear annoying noise of
vehicles outside.

DNR may be OFF or Effect level may be "LOW".

• Set DNR level properly.

Note: Default setting is "MID"(LED:YELLOW))

27

The TALK indicator and PAGE
indicator are blinking after
startup, and communication
cannot be performed at all. 

The Center Module may fail to start up. 

• Turn off the power and on the power again. 

9

The TALK indicator and PAGE
indicator are blinking after
startup, but communication
can be performed. 

The Double-Drive-Thru function does not work properly. But, the
Single Lane operation works well. 

• Check to see whether the power of the other Center Module is

set to ON. 

• Check to see whether the Center Modules are correctly con-

nected. 

• Check to see whether LANE A and LANE B are selected for

the lanes, respectively. 

9, 24