Tektronix Camcorder 2200 Manual De Usuario
3-42
Section 3 — Menu Descriptions
3.
Use the
VIDEO INPUT
knob to assign an input (1 - 32) to the
Model 2200 physical channel to which the Kaleidoscope
physical channel video return is connected.
physical channel video return is connected.
4.
Use the
KEY INPUT
knob to assign an input (1 - 32) to the
Model 2200 physical channel to which the Kaleidoscope
physical channel video return is connected.
physical channel video return is connected.
5.
Set up the aux bus format as described under the Aux Bus
Format heading later in this section. Make sure that any aux
buses assigned to Kaleidoscope are configured for
Format heading later in this section. Make sure that any aux
buses assigned to Kaleidoscope are configured for
KEY
operation of their B aux buses.
NOTE:
It is not necessary to set the format for aux buses that are to be
used for Effects Send. When Effects Send is selected, the B bus of each
selected aux bus is automatically configured as a key.
selected aux bus is automatically configured as a key.
6.
Press the
exit
button to return to the DPM Setup menu.
7.
Press
EXIT
again to return to the External Interface menu.