Tektronix Camcorder 2200 Manual De Usuario
2-6
Section 2— Control Panel Descriptions
Crosspoint Button Caution Indication
A primary crosspoint button may flash if the timing of a selected
input cannot be corrected by the automatic input timing circuit.
This flashing can be disabled through the Configuration menu.
input cannot be corrected by the automatic input timing circuit.
This flashing can be disabled through the Configuration menu.
Secondary Source Selection (Re-entry Crosspoints)
The secondary source (“M/E re-entry”) buttons,
M/E 1
are located
at the right of each row of M/E 2 primary crosspoint buttons. The
program output of M/E 1 may be re-entered as an input on an
M/E 2 bus by selecting this button as the input.
program output of M/E 1 may be re-entered as an input on an
M/E 2 bus by selecting this button as the input.
Key Delegation and Uncal Indicators
Each M/E has a two key buses but only one row of key bus
buttons. The keyer bus buttons are delegated to each key bus by
pressing the
buttons. The keyer bus buttons are delegated to each key bus by
pressing the
key 1
or
key 2
button in the keyer subpanel for that
M/E.
The
KEY 1
and
KEY 2
indicator LEDs, are located at the right of
each row of keyer crosspoint buttons and light to indicate which
keyer the row of buttons is currently delegated to control.
keyer the row of buttons is currently delegated to control.
M/E 1
Key 1
Key 2