Tektronix Camcorder 2200 Manual De Usuario
2-48
Section 2— Control Panel Descriptions
MISC
enables the following user-defined areas for learn and recall
operations: frame store settings, peripheral settings, GPI settings,
aux bus settings, mask bus settings, preview bus settings, and
matte wash settings for Backgrounds 1 and 2. All aux buses
default to the
aux bus settings, mask bus settings, preview bus settings, and
matte wash settings for Backgrounds 1 and 2. All aux buses
default to the
MISC
level unless assigned to a DPM level using the
Config/DPM Map Ports and Config/DPM Map Aux Buses
menus.
menus.
chan 1
,
chan 2
,
Global
, and
Camera
enable parameters of the
channel 1, channel 2, channel 3, and channel 4 DPMs (Digital
Picture Manipulators) for learn and recall operations.
Picture Manipulators) for learn and recall operations.
Pressing
ENABLe ALL
lights all Enable buttons if any or all of them
are not presently lit, or turns all Enable buttons off if all are
already lit. This action allows all enables to be turned off or on
with a maximum of two button presses.
already lit. This action allows all enables to be turned off or on
with a maximum of two button presses.
ENABLe ALL
may also be
used to enable all levels simultaneously when setting transition
rates (see the
rates (see the
TRAN RATE
button
description).
AUTO ReCalL
allows the state of the Enable buttons to be learned
or recalled as part of an effect.
If
AUTO ReCalL
is on while an effect is learned, the state of the
Enable buttons is learned as part of the effect. If
AUTO ReCalL
is off
while an effect is learned, the enables are not learned, and any
subsequent recall (even if
subsequent recall (even if
AUTO ReCalL
is on during the recall)
does not change the state of the enables.
If
AUTO ReCalL
is on during a recall, the enables (as learned) are
first recalled, then the resulting enabled portions of the switcher
are recalled. If
are recalled. If
AUTO ReCalL
is off during a recall, the enables
remain as set on the Enable panel, and those parts of the effect are
recalled.
recalled.
AUTO RUN
enables effect Recall-and-Run operations. When
AUTO RUN
is active, a register recall causes a recall of the
register, sets the Time Cursor at Time 0, and causes an
immediate run if the effect contains more than one
keyframe.
immediate run if the effect contains more than one
keyframe.
Misc
Chan 1
Chan 2
Camera
Global
Enable
All
All
Auto
Recall
Recall
Auto
Run
Run