Tektronix Camcorder 2200 Manual De Usuario

2-51

The

 button is at low tally whenever a get operation is 

permissible and off when the operation is not permissible (no 
current register, locked register).

When pressed, the 

button high-tallies and the E-MEM 

readout provides a prompt. For example, if Bank 0 and register 7 
are currently selected, the display prompts:

 

(If the bank were 1 and the current register 7, the display 
would show:  

To get the effect from a specific bank and register, change the bank 
number if the correct bank is not already selected, then enter the 
register number of the effect to be copied. Press

 to 

complete the

 operation.

The 

operation does not copy sequence link information 

(sequence link register or sequence delay) to the current register.

If the current register is locked, the 

 operation will not be 

performed, an error beep will sound, and the keypad readout will 
show “

”.

An

 of the

operation will restore the previous contents 

to the current register, without affecting the current switcher state 
or current register number.

Also, as mentioned previously under the 

button description, the 

button may be used for clearing out the current register by 

pressing 

The

 button provides a method of copying or “putting” the 

contents of the currently selected register into another E-MEM 
register.