Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Quadra-Fire
  4. CB1200-B
  5. Instruccion De Instalación

Quadra-Fire CB1200-B Instruccion De Instalación

Descargar
Página de 48
Page  18
7014-082D
September 1, 2008
R 
CB 1200 Pellet Stove 
3 to 3 inch Top Vent Adapter  
3 to 6 inch Top Vent Offset Adapter  
1. 
Put a layer of high temperature silicone on the 3 inch 
(76mm) exhaust outlet. 
2. 
Slide the top vent adapter onto the rear exhaust outlet 
and adjust the assembly to a vertical position.  
3. 
Drill 4 holes with #26 drill bit (provided) into the back of 
the appliance using the outer shield as a pattern (make 
sure the assembly is vertical).  Figure 18.1
4. 
Install the 4 mounting screws.
5. 
Install the vent pipe into the top vent adapter (be sure 
to silicone all joints).
6 
To clean the top vent adapter, open the clean-out cover.  
See Figure 18.1
B. Top Vent Adapter Installation
Installing the Top Vent Adapter
3" - 6"
Offset
Adapter
3" - 3"
Top Vent
Adapter
Drill holes in back of
stove and secure with 4
screws, 2 on each side.
Clean Out
Cover
Figure 18.1
C.  Rear Vent and Rear Vent to Top Vent 
Adapter Installation
Clean-Out Cover
Clean-Out Cover
Figure 18.2 - Rear Vent Adapter 
Figure 18.3 - Rear to Top Vent Adapter - 90
o
 
1. 
Put a layer of high temperature silicone on the 3 inch 
(76mm) exhaust outlet.
2. 
Slide the adapter onto the rear exhaust outlet and adjust 
the assembly to the appropriate position.  
3. 
Install the vent pipe into the adapter (be sure to silicone 
all joints)