Nortel Networks Water System BCM 1000 Manual De Usuario
Appendix B Initializing the system
33
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
a
If using a terminal emulation program (Hyperterminal), attach a configuration computer to
the BCM main unit serial port (recommended method).
the BCM main unit serial port (recommended method).
b
If you are accessing the BCM main unit through your local area network through SSH
(secure socket shell), use the default IP address 10.10.10.1.
(secure socket shell), use the default IP address 10.10.10.1.
5
When prompted for a User ID, type:
nnadmin
6
When prompted for a Domain, press <ENTER>.
7
When prompted for a Password, type:
PlsChgMe!
8
The Configuration main menu screen appears. Refer to
.
Figure 3 Configuration main menu screen
9
Enter the number of the parameter you want to configure.
Note: If the Initialization Menu screen appears instead of the Main Menu shown above,
your BCM system is not initialized correctly.
your BCM system is not initialized correctly.
Warning: Changing this information on an existing system completely erases the
telephony programming and disables the telephony system. It also reboots the BCM
system.
telephony programming and disables the telephony system. It also reboots the BCM
system.