Sony Ericsson DVP-CX777ES Manual De Usuario

HomeLogic LLC

100 Hoods Lane Marblehead, MA 09145 Phone (781) 639-5155 Fax (781) 639-9677

OneHome

DVD Integration Note

Manufacturer:

Sony

Model Number(s):

DVP-CX777ES

Comments:

Document Revision Date:

1/10/2006

VERVIEW AND

UPPORTED

EATURES

The DVD players include an RS-232 connection which is used to connect to the OneHome system and

provide communications, enabling reliable control of the DVD player.

IMPORTANT: This Integration Note covers the Sony DVD changer connected directly to the

OneHome System. It is also possible to integrate the DVD changer through a DVD media server,

such as the Escient DVDM-100: refer to the Integration Note for the compatible media server.

HESE

DVD

LAYERS SUPPORT THE FOLLOWING FEATURES

Basic Transport Control: Play, stop, etc.
Disc Selection: Select the desired disc.
DVD Information: The Viewer interface displays limited information about each DVD, using the

Carrousel + Select interface template.

NSTALLATION

VERVIEW

1. During the rough-in phase install the necessary power and A/V cabling for the DVD player.
2. Also during the rough-in phase, run a Cat5 wire from the location of the DVD player back to the

Network Assembly of the OneHome system to provide the serial connection needed to control the

receiver. Refer to the RS-232 Connection Options Integration Note for other serial connection

options.

3. Install the DVD player and other theater components.
4. Test the DVD player with the other theater components to ensure that the audio and video play

correctly.

5. Connect the OneHome system to the DVD player electrically. See the connection diagram for more

information.

6. Configure the OneHome system for the DVD player and confirm communication between the DVD

player and the HomeBrick.

7. Test the system by playing a DVD with the various transport controls.