Kärcher Oven PS640G Manual De Usuario

Descargar
Página de 32
III. QUICK REFERENCE:  TROUBLESHOOTING
SYMPTOM
PROBLEM
SOLUTION
No electrical power
Check that the circuit breaker/fused disconnect is on.
Make sure the emergenct stop button is on.
Oven will not
turn On.
No gas pressure
Burner did not light
Make sure main gas is on.
Turn oven off, and restart. If it still does not light, call for
service.
Oven will not
heat.
Air fingers may be as-
sembled incorrectly after
cleaning.
Turn oven off, and allow to cool. Reassemble fingers
correctly.
Oven is operating, but
little or no air is coming
from the fingers.
Oven is not up to operating
temperature.
Conveyor may be jammed.
Startup Sensor faulty or
sensor window dirty.
Allow oven to preheat.
Turn oven off, and allow to cool. Check conveyor for
blockage.
Clean window.
Sensor requires maintenance, call for service.
Conveyor will not move.
SYMPTOM
PROBLEM
SOLUTION
The internal battery needs
to be replaced to retain en-
ergy mode timings.
A qualified service technician should accomplish this.
Battery Symbol in the
lower right hand corner
Clean rear grills.
Failure to do this will eventually shut down the oven due to
excessive temperature.
High Control Compartment
Temperature
IV. SCREEN ALERTS
Control Over Temp
Rear Grills are clogged.
Clean grills.
Front belt jammed
Front belt has stopped.
Remove obstruction, and restart oven.
If no obstruction, call service.
Rear Belt jammed
Rear belt has stopped.
Remove obstruction, and restart oven.
If no obstruction, call service.
High Temp Error
Thermocouple or
Call service.
PLC malfunction.
Belt off-Oven not
Normal operation until
in temperature
Oven reaches operating
temperature.
Energy Saving Mode 1
Normal operation.
19