Edirol MA-1EX Manual De Usuario
8
Getting Connected and Installing Drivers English
Windows 98 users
*
The driver necessary for using the MA-1EX
with Windows 98 is provided on the Windows
CD-ROM. Make sure that you have the
Windows CD-ROM available.
with Windows 98 is provided on the Windows
CD-ROM. Make sure that you have the
Windows CD-ROM available.
*
Some computers are sold with the contents of
the Windows CD-ROM stored on the hard
disk, and therefore will not come with a
Windows CD-ROM. If this is the case for your
computer, you’ll be able to install the driver
even without the Windows CD-ROM.
the Windows CD-ROM stored on the hard
disk, and therefore will not come with a
Windows CD-ROM. If this is the case for your
computer, you’ll be able to install the driver
even without the Windows CD-ROM.
*
The
USB composite device
driver is
installed first, then the
USB audio device
driver is installed. Use the following
procedure to install the drivers.
procedure to install the drivers.
1.
With the MA-1EX disconnected, start up
Windows.
Windows.
*
Disconnect all USB cables except for a USB
keyboard and USB mouse (if used).
keyboard and USB mouse (if used).
*
Exit all currently running software
(applications).
If you are using a virus checker or similar
software, be sure to exit it as well.
(applications).
If you are using a virus checker or similar
software, be sure to exit it as well.
2.
Use the USB cable to
connect the MA-1EX to
your computer, and
turn on the MA-1EX’s
power (turn the
VOLUME knob toward the right).
connect the MA-1EX to
your computer, and
turn on the MA-1EX’s
power (turn the
VOLUME knob toward the right).
*
This unit is equipped with a protection circuit.
A brief interval (a few seconds) after
connecting a USB connector is required before
the unit will operate normally.
A brief interval (a few seconds) after
connecting a USB connector is required before
the unit will operate normally.
3.
USB composite device
will be detected
automatically, and the
“Add New
Hardware Wizard”
dialog box will
appear. Click
[Next]
.
4.
When
“What do you want Windows to
do?”
appears, select
“Search for the
best driver for your device
(Recommended)
(Recommended)
,
”
and click
[Next]
.
fig.05-27e_30
5.
A dialog box like the one shown will
appear.
Check
appear.
Check
CD-ROM drive
, and click
[Next]
.
*
If the display indicates
“Can’t find an updated
driver for this device
,
”
check
“Updated
driver
,
”
and click
[Next]
.
6.
A dialog box like the one shown will
appear.
Click
appear.
Click
[Next]
.
*
Depending on your system, the
Driver
location
may differ from the illustration, but
this is not a problem.
7.
File (driver) copying will begin.
If the Windows CD-ROM is not inserted
in the CD-ROM drive, a “Insert Disk”
dialog box may appear. In this case, insert
the Windows CD-ROM into the CD-ROM
drive and click [OK].
in the CD-ROM drive, a “Insert Disk”
dialog box may appear. In this case, insert
the Windows CD-ROM into the CD-ROM
drive and click [OK].
MA-1EX_efgis.book 8 ページ ２００５年１０月３１日 月曜日 午後２時３０分