CTC Store FSW2104 Prospecto
Specifications
Fiber Connector Type
SC, FC or ST type
Fiber Wavelength
1310nm (typical), 1550nm (optional)
Transmission distance
0 ~ 120km (optional),
depends on the transceiver model
depends on the transceiver model
Ethernet port
10/100Base-Tx (Auto-negotiation)
supports VLAN Tag (max. length 1536 bytes)
64K MAC address table
1M Byte packet buffer memory
supports VLAN Tag (max. length 1536 bytes)
64K MAC address table
1M Byte packet buffer memory
Voltage input scope
100~245VAC, 50/60Hz
-36~ -72VDC
-36~ -72VDC
Built-in power supply
< 5 Volts
Installation Instructions for
Installation Instructions for
4 Port 10/100Base
4 Port 10/100Base
-
-
TX Ethernet Switch
TX Ethernet Switch
with 1 Port 100Base
with 1 Port 100Base
-
-
FX Uplink
FX Uplink
Optical Fiber Switch
Optical Fiber Switch
Description
The FSW2104 is an unmanaged 4 port 10/100 switch with one 100Base-FX Fiber uplink.
They are designed for small workgroup applications that require a long distance
connection to the backbone, such as between buildings, offices, or within a campus
location. These switches provide port speeds up to 200 Mbps and full-duplex capability on
each auto-sensing port, for enhanced performance. A wide range of transceiver selection
provides fiber connection with SC, FC or ST type connectors, in multimode or single
mode and at distances from 2 to 120KM.
They are designed for small workgroup applications that require a long distance
connection to the backbone, such as between buildings, offices, or within a campus
location. These switches provide port speeds up to 200 Mbps and full-duplex capability on
each auto-sensing port, for enhanced performance. A wide range of transceiver selection
provides fiber connection with SC, FC or ST type connectors, in multimode or single
mode and at distances from 2 to 120KM.
Environment
Temperature : 0℃ - 50℃
Humidity 10-90% non condensing
Humidity 10-90% non condensing
Dimension
213mm x 106mm x 33mm
(H x W x D)
(H x W x D)
Power
+9V / 600mA maximum
V.: 1.1
Fiber
Fiber
Connection
Connection
Ethernet Connections
Ethernet Connections
LED
LED
Indications
Indications
Power Switch
Power Switch
AC Jack
AC Jack
ON
：Connection is made
OFF
：No connection is made
Blinking
：Transmitting or Receiving
TL1
,
TL2
,
TL3
&
TL4
ON
：Connection is made
OFF: No connection is made
Blinking
Blinking
：Transmitting or Receiving
FL
ON
：Power ON
OFF
：Power OFF
PWR
Status Description
LED Indicator
TX
：transmit data
RX
：receive data
Fiber
FX
Status Description
Indicator
Interface
Application
Internet