Cosmorex SE Manual De Propietario
fore it has been fully wound to position the
last frame. This indicates that you have
reached the end of the film. Should this
happen, put on the lens cap, supplied with
your camera, and then turn the Rewind
Release Ring [31 to the left fully. This will
insure that no portion of the
last frame. This indicates that you have
reached the end of the film. Should this
happen, put on the lens cap, supplied with
your camera, and then turn the Rewind
Release Ring [31 to the left fully. This will
insure that no portion of the
last frame is exposed to light as the shutter is
released by the Rewind Release Ring.)
released by the Rewind Release Ring.)
2. Raise the Film Rewind Knob (24) by gently
pressing against the top of the Knob with a
counter-clockwise movement. When the knob
springs up, grip it firmly and turn it clockwise
tin the direction indicated by the
counter-clockwise movement. When the knob
springs up, grip it firmly and turn it clockwise
tin the direction indicated by the
arrow). While resistance is felt, you are rewinding
the film back into the cassette. When film has
been fully rewound, the knob will turn freely
without resistance.
the film back into the cassette. When film has
been fully rewound, the knob will turn freely
without resistance.
3. Lift up the Camera Back Latch (22) and open
the Camera Back (38). Pull the Film Rewind
Knob (24) upwards fully , and let the film
cassette drop out of the Film Cassette
Chamber (30). Your film is now ready for
developing.
Knob (24) upwards fully , and let the film
cassette drop out of the Film Cassette
Chamber (30). Your film is now ready for
developing.
4. Push down Rewind Knob and lock in place.
Close Back. Move Rewind Release Ring (3)
clockwise fully so your camera's ready for
your next roll of film.
clockwise fully so your camera's ready for
your next roll of film.