Cosmorex SE Manual De Propietario

•Always screw the lens in firmly; when it

stops, give it a slight extra twist to insure
that it is securely attached.

T

hread-mount lenses, particularly lenses of

different manufacture, may sometimes "seat"
with the aperture and distance scales slightly to
the right or left of "center" position. This does
not indicate any defect in your camera or lenses,
and in no way affects camera/lens operation.

T

ake care not to expose your camera's interior to

dust, dirt, or moisture when the lens has been
removed. Always replace the lens on the camera
body as soon as possible.

 W

hen removing or storing lenses, protect them

from accidental damage by placing the lens face
down and, if possible, attaching a rear lens cover (
available from your dealer, and usually included
with accessory lenses).

 Y

our Cosmorex accepts interchangeable thread-

mount lenses from 16mm wideangle to
1000mm ultra-telephoto.

 S

tandard automatic lenses of this type

incorporate a single metal pin (illustrated)
through which your camera actuates the lens'
automatic diaphragm mechanism.

NOTE: Thread-mount lenses specifically
designed for SLR cameras of a particular
model other than the Cosmorex may in-
corporate special "keying" levers (illustrated).
Such lenses should not be used on your camera
.

This manual created and owned by www.
butkus.org/chinon, it should not be found
elsewhere.