Cosmorex SE Manual De Propietario
If this happens ...
Here's Why ...
And how to correct it .. .
In loading, Film Sprockets
(35) do not turn and film
does not take up.
(35) do not turn and film
does not take up.
Rewind Release Ring
(3) and/or Shutter Re-
lease Button (2) not
turned fully to the
right (clockwise).
(3) and/or Shutter Re-
lease Button (2) not
turned fully to the
right (clockwise).
Turn Release Ring (3) and Re
lease Button (2) completely to
the right, till further movement
is impossible.
lease Button (2) completely to
the right, till further movement
is impossible.
After loading, Exposure
Counter (4) skips two or
more numbers after being
set to "0" position.
Counter (4) skips two or
more numbers after being
set to "0" position.
Film Transport Lever
(1) not fully wound
before counter is set to
"0" position.
(1) not fully wound
before counter is set to
"0" position.
Advance Transport Lever fully
before setting counter to "0".
before setting counter to "0".
Self-Timer does not trip
shutter.
shutter.
Self-Timer Lever (10)
not fully wound.
not fully wound.
Wind Self-Timer Lever fully
until lever points downwards,
with no further movement
possible.
until lever points downwards,
with no further movement
possible.
Lens does not close down
to indicated aperture when
Self-Timer is used.
to indicated aperture when
Self-Timer is used.
Auto/Manual Switch (14)
on lens not set on "M"
on lens not set on "M"
Move Auto/Manual Switch
(14)' to "M" whenever Self
Timer is used.
(14)' to "M" whenever Self
Timer is used.
Flash Unit fires when
Shutter Release is parti-
ally pressed, or does
not fire.
Shutter Release is parti-
ally pressed, or does
not fire.
"X" or "M" Indicator (
6)
not aligned correctly.
6)
not aligned correctly.
Move Indicator (6) to "X"
position for electronic flash, or
"M" position for flash cubes and
bulbs.
position for electronic flash, or
"M" position for flash cubes and
bulbs.