Cosmorex SE Manual De Propietario
8. Once more press Shutter Release (2), and wind
Film Transport Lever (1) fully ... and your first
film frame is in position, as shown by the
Exposure Counter Indicator (34).
film frame is in position, as shown by the
Exposure Counter Indicator (34).
W
hen moving the Transport Lever as de-
scribed above, the Film Rewind Knob (24)
will rotate counter-clockwise by itself. This
provides positive assurance that your camera
is correctly loaded, and that film is being
wound through the camera.
will rotate counter-clockwise by itself. This
provides positive assurance that your camera
is correctly loaded, and that film is being
wound through the camera.
If the Rewind Knob does not rotate as you
move the Transport Lever, and you
move the Transport Lever, and you
have taken up the "slack" in the cassette as
described in Step No. 4, open camera back to
check that film is securely attached to
Take-Up Spool.
check that film is securely attached to
Take-Up Spool.
A
lways make sure the Transport Lever (1) has
been fully wound. This is easiest when you
move this lever in two short strokes. When the
lever stops during the second stroke, you are
assured that the camera's film, shutter and
exposure counter are all ready for exposure.
Failure to fully wind the Transport Lever may
result in a "blank" exposure.
move this lever in two short strokes. When the
lever stops during the second stroke, you are
assured that the camera's film, shutter and
exposure counter are all ready for exposure.
Failure to fully wind the Transport Lever may
result in a "blank" exposure.