Furuno IF-NMEASC Manual De Usuario
4
3.
ADJUSTMENTS
3.1
LEDs and Equipment Status
The six LEDs above the heading indication light, flash or go off according to equipment status.
LED state and equipment status
LED
LED state and equipment status
GPS
ON: Both GPS antennas in the SC-30 are receiving from five or more satel-
lites.
OFF: One of the GPS antennas is receiving from 3 or fewer satellites.
lites.
OFF: One of the GPS antennas is receiving from 3 or fewer satellites.
OUTPUT
ON: All data is output from the SC-30 normally.
Flashing: Motion (heading, roll, pitch) is output (heave is fixed at 0, position
and speed are normal) by dead reckoning.
OFF: Heading output is stopped.
Flashing: Motion (heading, roll, pitch) is output (heave is fixed at 0, position
and speed are normal) by dead reckoning.
OFF: Heading output is stopped.
PROCESSING
ON: GPS processor is functioning properly.
Flashing: Initializing for GPS.
OFF: Not enough satellites received.
Flashing: Initializing for GPS.
OFF: Not enough satellites received.
SENSOR1
ON: Rate gyro normal on all three axes.
OFF: Rate gyro error.
OFF: Rate gyro error.
SENSOR2
ON: Acceleration sensor normal on all three axes.
OFF: Acceleration sensor error.
OFF: Acceleration sensor error.
CR33
Flashing: Valid NMEA 2000 data is input.
ON: No valid NMEA 2000 data is input.
OFF: CPU error, or no power.
ON: No valid NMEA 2000 data is input.
OFF: CPU error, or no power.
-
+
Enter
Menu/
Cancel
GPS OUTPUT PROCESSING
SENSOR1
SENSOR2
CR33: Status LED
for IF-NMEASC
for IF-NMEASC
Heading
Pitch
Sentence
Roll
Bps
Output
Interval
Bps
Sentence
Output
Interval
Status LEDs
for SC-30