MiTAC TYAN S7012 Manual De Usuario

7 

http://www.tyan.com 

 
You are now ready to install your motherboard. The mounting hole pattern of the 
S7012 matches the SSI EEB specification. Before continuing with installation, 
confirm that your chassis supports an SSI EEB motherboard. 
 
 
How to install our products right… the first time 
 
The first thing you should do is reading this user’s manual. It contains important 
information that will make configuration and setup much easier. Here are some 
precautions you should take when installing your motherboard: 
 

(1)  Ground yourself properly before removing your motherboard from the 

antistatic bag. Unplug the power from your computer power supply and 
then touch a safely grounded object to release static charge (i.e. power 
supply case). For the safest conditions, TYAN recommends wearing a 
static safety wrist strap. 

(2)  Hold the motherboard by its edges and do not touch the bottom of the 

board, or flex the board in any way. 

(3)  Avoid touching the motherboard components, IC chips, connectors, 

memory modules, and leads. 

(4)  Place the motherboard on a grounded antistatic surface or on the antistatic 

bag that the board was shipped in. 

(5)  Inspect the board for damage. 

 
The following pages include details on how to install your motherboard into your 
chassis, as well as installing the processor, memory, disk drives and cables.