Casio Stereo Amplifier SEC-BAND Manual De Usuario
![Casio](https://files.manualsbrain.com/attachments/76bb10c5ed22dc25bda27ce93ac32ebe64efb4fa/common/fit/150/50/0de27031ecb5bbe57508fbe18af1d7fa9c82f769f0afcb4f5472bbed175d/brand_logo.png)
3133501
Figure 5 - Diagram of AC power cable
Transmitter Feed
If using an SSPA with an N-type connector output, connect a section of coax between the OMT
transmit port and the SSPA’s transmit port.
If using a SSPA with a waveguide flange output port, connect a section of waveguide between the
OMT transmit port and the SSPA’s transmit output, TX OUT. A waveguide should be attached to the
antenna feed per manufacturer’s instructions. Ensure a gasket is fitted at each flange and that the
connections are weather-tight.
antenna feed per manufacturer’s instructions. Ensure a gasket is fitted at each flange and that the
connections are weather-tight.
Driver Feed
Attach a coaxial cable with male N-connectors between the SSPA’s TX RF input and the 0
dBm driver’s RF OUTPUT. Make sure that the connections are weather-tight.
A
NA
C
OM
AnaSat
®
SSPA
15