Dynojet Research Microphone 98224105 Manual De Usuario
M O B I L E B A S E I N S T A L L A T I O N
Installation
Version 1
Mobile Base Installation Guide
1-11
I
NSTALLING
THE
R
EAR
W
HEEL
M
OUNT
A
SSEMBLIES
1
Remove and discard the three existing bolts from the brake and the dyno; these
bolts are too short.
bolts are too short.
Figure 1-15: Remove the Existing Bolts
2
Secure one wheel mount to the dyno and one wheel mount to the brake using
three 3/8-16 x 1-inch bolts with thread lock and three 3/8-inch washers.
three 3/8-16 x 1-inch bolts with thread lock and three 3/8-inch washers.
3
Secure each wheel mount to the mobile base frame using two 3/8-16 x 3/4-inch
bolts with thread lock and two 3/8-inch washers.
bolts with thread lock and two 3/8-inch washers.
Figure 1-16: Install the Rear Wheel Mount Assemblies
existing bolts on brake
existing bolts on dyno
remove and discard
remove and discard
3/8 x 3/4-inch bolts
3/8 x 1-inch bolts
wheel mount
mobile base frame