D-Link DCS-2332L Manual De Usuario

D-Link DCS-2332L User Manual

Section 2: Installation

SD Memory Card Installation

The SD memory card slot is housed behind the lower protective panel on the

rear of the device.

Step 1:

Place the camera face down on a non-slip flat surface

Step 2:

Carefully pry out the two lower protective rubber grommets using a thin flat blade.

Step 3:

Undo the two screws using a Philips #00 Screwdriver.

Step 4:

Lift off the protective panel.

Step 5:

Insert a MicroSD Memory Card.

Step 6:

Replace the protective panel.

Step 7:

Replace the two screws. Ensure that the screws are tightened firmly.

Step 8:

Firmly replace the protective rubber grommets.

Note: To ensure that the camera stays weatherproof, users are advised to ensure

that all the rubber seals are secured firmly in place.